After the installation of mobile scaffolding, the inspection and acceptance shall be carried out according to the following standards: the inspection and acceptance regulations for the quality of mobile scaffolding erection. The structure of the scaffolding meets the requirements of the construction scheme, the size changes of individual parts should be within the allowable adjustment range, and the safe connection of the nodes is reliable. The tightening degree of fasteners should be controlled at the torque of 40N.m~60N.m, the welding quality of all welded parts should be reliable, the embedding of embedded parts should meet the design requirements, have sufficient strength, and the joint connection of wire rope should be reliable.
The vertical degree of the vertical pole should be less than (+300) and the maximum vertical deviation value should be controlled at the same time. The horizontal deviation of the vertical horizontal pole of the scaffold should be less than 1/250. The horizontal deviation value of the whole frame length is not more than 50 mm; the working layer and the safety protection should meet the relevant requirements; the inspection and acceptance of mobile scaffolding should be carried out regularly, and only after the inspection is qualified, can the scaffolding be allowed to put into use or continue to use.
标签:   脚手架 热风炉 热风炉厂家 生物质热风炉 燃气热风炉