我们是专业的[【热风炉】生产厂家!

常州亿创能源科技有限公司

示例图片三
网站首页 > 行业资讯 > 行业知识

厂家介绍燃气热风炉结构【图解】

2019-04-07 11:11:31 常州亿创能源科技有限公司 阅读

燃油燃气热风炉的燃料通过燃烧器燃烧,产生高温燃气。并借助具有强化换热措施的热风炉将高温燃气的热量传导给被加热的空气,高温燃气经热量散发后温度降低至250度以下由引风机排放大气。需加热的空气通过选配的鼓风机强送入热风炉,吸热后温度升至额定值从热风出口送出,当热风温度达到额定的上限温度时,燃烧器会自动停止燃烧或自动转为小火焰燃烧;当热风温度降低到额定的下限温度时,燃烧器又会重新点燃运行或转为大火燃烧,升温的速度可调进风阀来实现。

The fuel of oil-fired gas hot blast stove burns through burner to produce high temperature gas. The heat of the high-temperature gas is transmitted to the heated air by means of a hot blast stove with enhanced heat transfer measures. After heat dissipation, the temperature of the high-temperature gas is reduced to below 250 degrees, and the air is discharged by the induced draft fan. The heated air is forced into the hot blast stove through the selected blower, and the temperature rises to the rated value after heat absorption and is sent out from the hot blast outlet. When the hot blast temperature reaches the rated upper limit temperature, the burner will automatically stop combustion or turn to small flame combustion; when the hot air temperature drops to the rated lower limit temperature, the burner will re-ignite operation or turn to large fire combustion, and the heating rate will increase. Adjustable air intake valve to achieve.

燃气热风炉是节能清洁的表率,燃气热风炉的结构组成部分有哪些?组成部分,我们可以参考燃煤热风炉的组成:燃煤热风炉由炉炉排、耐火砖、反射板、热风炉本体、烟道及进风管道、除尘器、烟囱及其支架、引风机(含调节阀门)、鼓风机(含调节阀门)和专用测温仪器等组成。

Gas-fired hot-blast stove is an example of energy saving and cleanliness. What are the structural components of gas-fired hot-blast stove? We can refer to the composition of coal-fired hot-blast stove: coal-fired hot-blast stove consists of grate, refractory brick, reflector board, main body of hot-blast stove, flue and intake duct, dust collector, chimney and its support, induced draft fan (including regulating valve), blower (including regulating valve) and special temperature measurement. Instruments and other components.


标签:   热风炉 热风炉厂家 生物质热风炉 燃气热风炉 热风炉价格